Pulsar Helion 2 XQ50F Thermal Imaging Monocular

Pulsar Helion 2 XQ50F Thermal Imaging Monocular

2,900.00

Pulsar Helion 2 XQ50F Thermal Imaging Monocular

Availability: Only 1 left in stock Category: Tag: Brand: Pulsar

Description

Pulsar Helion 2 XQ50F Thermal Imaging Monocular

 

Description

The Helion 2 XQ50F has a generation 2 thermal sensor, providing even more detail in difficult environmental conditions such as cold mornings, rain or fog.

New <40mK Thermal Sensor

By now, most thermal users are familiar with the sensor resolution of a device e.g. 384×288, and also the pixel pitch e.g. 17µm. The improvement of these new Series 2 devices concentrates on a key specification of thermal sensor technology – the NETD value.

The NETD (Noise Equivalent of Temperature Differential), expressed in millikelvins (mK) is one of the most important parameters for thermal sensors as it describes their sensitivity. The lower the NETD value, the higher the sensitivity.

In existing Helion, Trail and Accolade series models the NETD value was sub 60mK. The new <40mK sensor, exclusively manufactured by ULIS for Pulsar puts Pulsar devices at the forefront of the market with the devices all featuring a better image in conditions where there is a low-temperature difference such as during rainfall, fog or cold mornings. These environmental conditions are the most difficult for thermal imagers and this new sensor will provide a clearer image for users.

The Helion 2 XQ series features a 384×288 17µm thermal sensor and a F50/1.0 (XQ50F) or F35/1.0 (XQ38F) lens that provides a detection range of up to 1800m (XQ50F) & 1350m (XQ38F) for a deer-sized object.

Stream Vision

Using the free, high-tech IOS and Android compatible Stream Vision app, this Pulsar device connects via Wi-Fi to allow transfer of images and video to smartphones and other wireless devices in real time, stream footage to Youtube and other online video platforms, and even use your personal device as a wireless remote control.

Features

  • Long detection range
  • High magnification
  • Step-Up digital zoom
  • Frost-Resistant AMOLED display
  • 50Hz Refresh rate
  • Focusable lens
  • Dioptre control
  • 8 Colour modes
  • “Display Off” mode
  • PiP mode
  • Built-In photo & video recorder
  • 16GB internal memory
  • Stream Vision compatible
  • User Friendly controls
  • Stadiametric rangefinder
  • IPX7
  • Wide operating temperature (-25°C to 50°C)
  • Four observation modes (Forest, Rocks, Identification and User)
  • Three calibration modes (Manual, semi-auto, auto)
  • Pixel correction
  • Quick-Change, rechargeable IPS5 battery pack
  • MicroUSB port
  • Retained lens cap
  • IPS Battery charger
  • Image Boost Technology

Specification

  • Frame Rate: 50hz
  • Microbolometer Resolution: 384×288
  • Display: True HD AMOLED
  • Display Resolution: 1024×768
  • Magnification: 4.5-18x
  • Digital Zoom: 2x/4x/8x
  • Objective Lens: F50/1.2
  • Field of View: 7.5º
  • Built-in Memory: 16GB
  • Eye Relief: 16mm
  • Range of Detection: 1800m
  • Battery: B-Pack Li-ion rechargeable battery
  • Runtime: 8hrs (B-Pack Li-ion)
  • Dimensions: 226x55x58mm
  • Weight: 450g

What you get

  • Pulsar Helion 2 XQ50F
  • IPS7 Battery Pack
  • Battery charger with mains charger
  • USB cable
  • Carrying case
  • Hand strap
  • User manual
  • Lens cloth
  • Warranty card

Warranty

This comes with a 3 year warranty from Pulsar. See the User Manual that comes with the Pulsar Helion 2 XQ50F.